Connerctors for Cross Rods

Quick Find

Categories

Downloads

Info

Let's See What We Have Here

Category description:

In dieser Kategorie finden Sie Traversenhalter (auch Stabclip genannt) aus geschliffenem Edelstahl.

Im Unterschied zu anderen Traversenhaltern kann ein Stabclip zwei Stäbe (je nach Ausführung mit gleichen oder unterschiedlichen Durchmessern) miteinander in jedem beliebigen Winkel über Kreuz verbinden. Da der Stabclip zweiteilig ist, kann der Winkel der beiden Streben zueinander frei eingestellt werden.

Andere Verbinder besitzen ein Gelenk oder können gebogen werden.

Eine weitere Gruppe von Verbindern ist starr auf 90° eingerichtet. Hier kann der Winkel nicht verändert werden.

Im Geländerbau werden hauptsächlich Querstreben mit 12mm Durchmesser verwendet.

1-15 (of 15)

Pages: 1

Product Name+

Price

request without engagement

STH006966

Rod holder/rod clip made of V2A, two-piece, rotatable, with through holes 12.2/12.2 mm

Automated translation via DeepL AI. Only the German product description is legally binding. ... more

2,10 EUR
(plus 19% VAT = 2,50 EUR
plus shipping costs)

STH006976

Rod holder made of V2A, two-piece, rotatable, with through holes 14.2/12.2 mm

Automated translation via DeepL AI. Only the German product description is legally binding. ... more

2,54 EUR
(plus 19% VAT = 3,02 EUR
plus shipping costs)

STH006977

Rod holder made of V2A, two-piece, rotatable, with through holes 14.2/14.2 mm

Automated translation via DeepL AI. Only the German product description is legally binding. ... more

5,90 EUR
(plus 19% VAT = 7,02 EUR
plus shipping costs)

STH00696

Rod holder made of V2A, two-piece, Ø 25 mm, rotatable, with through holes 16.2/12.2 mm

Automated translation via DeepL AI. Only the German product description is legally binding. ... more

5,90 EUR
(plus 19% VAT = 7,02 EUR
plus shipping costs)

STH006978

Rod holder, rod clip, 3-piece, complete with grub screws, rotatable, ground
surface, V2A (AISI 304)
with through holes 16.2/16.2 mm
== Scope of delivery: 2x STH3001-16-flat (Ø16mm) + 1x pin (the two base parts supplied with the STH3001-16-flat may need to be unscrewed on site and replaced with the pin, unless already pre-assembled by us) ==

Automated translation via DeepL AI. Only the German product description is legally binding. ... more

5,90 EUR
(plus 19% VAT = 7,02 EUR
plus shipping costs)

STV0302-10

Stainless steel rod connector, V2A, ground surface, with joint for cross rods Ø= 10 mm, Ø external diameter D = 12 mm, H = 30

Automated translation via DeepL AI. Only the German product description is legally binding. ... more

Discount
Qty	> 1	> 50
Price	1,96	1,76

1,96 EUR
(plus 19% VAT = 2,33 EUR
plus shipping costs)

STV0302-12

Stainless steel rod connector, V2A, ground surface, with joint for cross rods Ø= 12 mm, Ø outer diameter D = 16 mm (H = 30 / L = 60)

Automated translation via DeepL AI. Only the German product description is legally binding. ... more

Discount
Qty	> 1	> 50
Price	1,96	1,76

1,96 EUR
(plus 19% VAT = 2,33 EUR
plus shipping costs)

STV00710

Stainless steel rod connector, matt finish, bendable, easy to use, for cross rods Ø = 12 mm, D=14mm, L = 70 mm

Automated translation via DeepL AI. Only the German product description is legally binding. ... more

1,58 EUR
(plus 19% VAT = 1,88 EUR
plus shipping costs)

STV1001-14

Stainless steel rod connector, bendable for cross rods d= 14 mm

Automated translation via DeepL AI. Only the German product description is legally binding. ... more

Hinweis zum Biegen: - aufgeklebte Drehteile von den Enden des Winkels entfernen, - Winkel in Schraubstock einspannen und mit Lötlampe rotglühend erhitzen, - auf gewünschten Winkel biegen, - abkühlen lassen, - Verfärbung mit Schleifpapier K240 abschleifen, - Drehteile wieder au

9,40 EUR
(plus 19% VAT = 11,19 EUR
plus shipping costs)

STV1002-12

V2A stainless steel rod connector, connector for round rods, with 2 grub screws for cross rods d= 12 mm
Dimensions: A= 18 mm, rod diameter = 12 mm

Automated translation via DeepL AI. Only the German product description is legally binding. ... more

2,65 EUR
(plus 19% VAT = 3,15 EUR
plus shipping costs)

STH6526

Crossbar connector made of V2A, diameter = 22 mm, with through hole 12.2 mm and blind hole 12.2 mm (15 mm deep), distance between centre of through hole/foot = 30 mm, 2 grub screws for fixing the bars

Automated translation via DeepL AI. Only the German product description is legally binding. ... more

4,10 EUR
(plus 19% VAT = 4,88 EUR
plus shipping costs)

STHNEU-12-LINKS

V2A stainless steel crossbar corner connector for Ø A = 12 mm crossbars, with 2 hexagon socket screws
Clearance sale of remaining stock

Automated translation via DeepL AI. Only the German product description is legally binding. ... more

3,50 EUR
(plus 19% VAT = 4,17 EUR
plus shipping costs)

STHNEU-14-LINKS

V2A stainless steel crossbar corner connector for Ø A = 14 mm crossbars, with 2 hexagon socket screws
Clearance sale of remaining stock (currently 20 pieces)

Automated translation via DeepL AI. Only the German product description is legally binding. ... more

3,50 EUR
(plus 19% VAT = 4,17 EUR
plus shipping costs)

STHNEU-12-RECHTS

V2A stainless steel crossbar corner connector for Ø A = 12 mm crossbars, with 2 hexagon socket screws
Clearance sale of remaining stock (currently 4 pieces)

Automated translation via DeepL AI. Only the German product description is legally binding. ... more

3,50 EUR
(plus 19% VAT = 4,17 EUR
plus shipping costs)

STHNEU-14-RECHTS

V2A stainless steel crossbar corner connector for Ø A = 14 mm crossbars, with 2 hexagon socket screws
Clearance sale of remaining stock (currently 45 pieces)

Automated translation via DeepL AI. Only the German product description is legally binding. ... more

3,50 EUR
(plus 19% VAT = 4,17 EUR
plus shipping costs)

1-15 (of 15)

Pages: 1

Your Cart